613 97293250

Minature Level Controls

minaturelevels

Minature Level Controls

Advantages
Reed switch operation gives millions of reliable cycles.

Direct action of float on the reed switch gives accurate control.

Controls withstand vibration, pressure, vacuum, shock.

Maintenance free.

Simple construction gives rugged reliability.

Easy installation and adjustment.

Interchangeable stems and floats with reversible magnetic float for
versatile applications.

U.L. recognition on many models.
Mini-Level switches fit pipe openings of 1″ BSP. They provide accurate liquid level control in vessels as small as a teacup.
Designed for versatile application, magnetic floats actuate an SPST reed switch in the stem to operate valves, starters, pumps, alarms, interlocks, computer inputs and other process equipment. Changing liquid level in vessel moves the float up or down stem, actuating the switch at exact level settings.
Stem and float materials include brass, stainless, Buna-N and polypropylene. Any practical material combination is possible because all stems and floats are easily interchangeable. Most models are U/L recognised and units are available for corrosive or non-corrosive service.
Mini-Level switches can be top, bottom or side mounted in the vessel. They also perform well tilted at modest angles. High current loads can be accommodated by Solid State Relays.
Engineering assistance offered by Baccara Automation Control will help you determine the right control for your application.

erecta

BLS-02 Flow Switches

Miniature Vertical Float Switches.
These 1″ 316 stainless steel or poly propylene vertical float switches are corrosion resistant and ideal for applications where smaller devices are required. Different float configurations allow for greater flexibility and cost options. These float switches provide both Normally Open (NO) or Normally Closed (NC) float switch operation with a 25mm float also available in other materials on request.
Advantages

1 A 12/24 VDC-125VAC

70 Watt 250 VAC

FL IP67 Sub to termination

-25C to +125 C

0.8 G/cm3

Poly propylene or Stainless Steel

1.5 Mpa

0.15 lbs (0.07 kg) BLS-02 Flow Switches

pdf

bls_1

BLS-06 Finger Loat Switches

Plastic and stainless steel side mounted float switches for general use and OEM solutions. These switches are easily mounted through a horizontal NPT fitting or internal through-hole. This “pivot” style float switch provides point level sensing, and can be rotated for Normally Open or Normally Closed operation. Combine two switches at different levels for high and low level or pump control. These float switches offer reliable performance and durability. The 316 series stainless steel switch is ideal for corrosion resistance applications or general level detection.
Advantages:
1 A 12/24 VDC-125VAC

70 Watt 250 VAC

FL IP67 Sub to termination.

-25C to +125 C

0.8 G/cm3

Poly Propylene or Stainless Steel.

1.5 Mpa

0.15 lbs (0.07 kg) BLS-06 Finger Load Switch.

pdf

drumlevelcontrols

Drum Level Controls

This control fits the 11/4″”NPT threaded opening found on 44 gallon drums and other containers used to store and dispense liquids. Its use allows the automatic filling and emptying of drums. High and Low level sensing switches start and stop filling or operate alarm.

1/2″ conduit connector to pump control relay.
Weather proof housing.
Manual switch to top off or drain drum completely
Reverse switch to pump up or pump down.
11/4″ pipe plug fits most drum openings.
Top switch for high level stop on fill mode, start on empty mode.

Bottom switch for low level stop on empty mode. Starts on fill mode.
Also available with optional high or low level alarm contacts. Drum Level Controls

pdf

float_switch_weight_1

Teathered or Weighted Pump Float Switch

Automatically turns a pump On and Off
(The stock model turns on when the water rises)****
* Adjustable switching level
(your choice based tether or weight position)
* Bare wire model- (electrician Recomended)
* Weighted model available (as standard)
* All models are 10 amp
* Float size … Length 105mm x width 85mm x thickness 45mm
Suitable For: For any pump or suitable appliance that needs automatic switching
Possible applications: Drains where no pump can fit, simply place the float switch in and dry mount the pump. Great for pumps which did not come with a float switch. Great for wet cellars, automatically filling a pond when evaporation or leaks have reduced the water level. Automatically filling header tanks

pdf