|
|
|
 |
Solenoid Valves
Baccara stock a full range of 2/2 or 3/2 way NC or NO valves which will meet your control requirements.
Properties
Body Material
Mazak,Brass or Stainless Steel
Orifice Sizes
Series 3 - 0.8mm
Series 5 - 1.6mm
Series 7 - 2.4mm
Series 9 - 3.0mm
Electric Connection
AMP pins, DIN 46242
Manual Override
Standard on all valves |
 |
GEVA 80 Operator
These valves are based on the GEVA 80 operator
Due to its relatively low power consumption, the valve can be directly operated from an electronic controller. The valves are used mainly in pneumatic applications as a pilot valve, but can be used for gas, water and light oils.
Can be supplied suitable for single or gang mount configurations. Consult our sales office for special requirments |
 |
Chemsol chemical dosing valve
These valves have a diaphragm seperating the electrics from the media
Due to the possible corrosion effect, the valve can be directly operated with any voltage circuit. The valves are used mainly in firtilizer dosing or corosive chemical control.
Can be suppied in 1/8" 1/4" 1/2" and out soon 3/4" & 1". Consult our sales office for special requirments |
 |
LEGO Manifolds
Overview
GEM-SOL solenoid valves are designed to be mounted on a sub-base or on an appropriate counterpart adapted to this valve type. This version is suitable for mounting any number of valves on the same sub-base plate. |
 |
| Any combination of 2/2 or 3/2 way normally closed or open may be grouped together. The modular manifold design enables to achieve any manifold length. This system allows a wide program of control or automation in minimum space and maximum rationalization. |
Pilot Operated 2/2 Way NC, NO Solenoid Valves
Baccara stock a full range of 2/2 way NC, NO pilot operated solenoid valves which are recommended for applications where high flow at high pressure are required. They are highly suitable for control and automation systems.due to there manual override as standerd they are especially suited to fire sprinkler systems |
 |
Typical Applications
Industrial Furnace
Heating Equipment
Burners
Oil and Gas
Autoclaves
Dental Equipment
Instrumentation
Carwashers
Irrigation - etc. |
 |
Pilot Assisted Diaphragm Control Valve
These general purpose solenoid valves with are internally piloted but are not fitted with manual override. This servo system is a well proven system offering low power consumption with high pressure capabilities. The valves are ideal for use on installations with difficult access, such as car washers.
Features
1/2", 3/4" and 1" BSP
Low Power Consumpion
Tight Shut Off
Low Maintenance
Easy Coil Change
Compact Design with high Flow Rates
Low Differential Pressure
Process Systems
Chemical Processing
Water Treatment
Pneumatic Systems
Oil lines
& Irrigation Systems
General Purpose Applications |
 |
GEVA P80-S
Overview
Model Geva P80-S The Model (P1477)Geva P80-S Solenoid Valve is a servo assisted valve with a glass reinforced nylon body. It is recommended for general applications where high flow is required. It has a manual override and is a low cost option for use on water with replacable coils or simple voltage changes.
can be supplied in basic diaphragm valve form or with a flow regulator on top of the diaphragm to adjust the amount it can open |
 |
GEVA P75 - Z
Overview
Model Geva P75 - Z The Model Geva 80P - 0 Solenoid Valve has a glass reinforced nylon body with diaphragm spring assist on opening. It is recommended for low headloss applications where flow and pressures may vary or where there is no pressure at all, it uses an external pressure source like mains water supply to close against the spring pressure this valve is idealy suited to use on water storage tanks or places where there is limited water pressure |
 |
Plastic 2/2 Way Solenoid Valves for Liquid and Gaseous Media
Baccara stock a full range of 2/2 way basic diaphragm valves from 3/4 " to 2"" which are recommended for applications where high flow rates or higher than normal pressure's are required. They are highly suitable for control and automation systems,and are ideal for irrigation sprinkler applications and can be cofigured in a veriaty of specialized units |
 |
Pressure Releif
Pressure Sustaining
Pressure Reducing
or controlled from a remote source dependant on accessorys used |
 |
Namur 3/2 Way Solenoid Valve for Pneumatic Actuators with Namur Interface
These Gem-Sol solenoid valves with NAMUR plate designed to be mounted on an appropriate actuator maunting facia.
A closed circuit system is also available for use in a contaminated installation.
Valves are rated at 12bar or below. Higher pressures are available on request.
Coils are rated AC 8 Watt or DC 10 Watt. |
 |
Namur 5/2 Way Solenoid Valves for Pneumatic Actuators with Namur Interface
Baccara's 5/2 Way Namur Solenoid Valve Series are suitable for direct mounting onto Pneumatic Rotary actuators for both double acting and spring return configurations with Namur interface. |
 |
Optional Extras include
an LED Indicator Plug which shows when power is applied to the coil.
This indicator may be used as an aid in fault finding and for Power
Indication
Exhaust silencers which protect the valve from the buildup of dirt and
rubbish and reduces wear and tear.
Flow Restrictors which regulate the movement of the actuator for
smoother operation |
 |
Two Hand Safty valve or Anti Tigh down valve
Small compact unit
simple to install
Ideal for press gard operators
Factory safty equipment |
 |
| Top |
 |
|
|
|
|
|
|
|
|
|
