|
|
|
 |
Single station window or irrigation controllor
Overview
Stand-alone battery driven window or irrigation controller timer for ether 1,2,or 4 valves G75 2W NC system The irrigation timer has 3 program options 9VDC latch coil connected. Powered by a single 9V battery. Can operate any valve equipped with 3/4" UNEF solenoid cavity (Richdel type). The window timer however only operates a single valve and has a 24 hour 7 day week program |
 |
Multi zone Controller
Overview
The Geva 75 multi-zone AC irrigation controller is a new generation of irrigation controllers, with a user friendly menu driven interactive software. It is a 24VAC, 4 to 8 zones irrigation controller with an integrated backup battery. Enables to operate G75 24VAC coils or equivalent.also can be supplied stand alone Battery operated and fitted with latch coils for longer service life |
 |
G75 Pilot valve
Overview
GEVA 75 1/8" Solenoid valves are based on GEVA 75 operators mounted on a plastic base. These bases are available with or without flange, manual override as standard. The epoxy encapsulated construction ensures complete sealing of coil and leads all wet metal parts are made of passivated stainless steel for high corrosion protection this sufficient design makes it possible to acheive high pressure with low inrush and holting currents with a wide voltage tollerance. |
 |
G75 Latch Coils
Overview
The Two way, Three way normally closed, normally open operator is compatible with the 3/4-20 UNF operator seat. Epoxy encapsulated construction and exclusion of air, assures complete sealing for the coil and lead wires entry.
Wet metal parts are made of passivated Stainless steel for maximum corrosion protection. The operator consists of one coil with exit of two lead wires. Electrical operation by reversing the current, by use of transistors or relays. |
 |
Water Tank Drain Valve
Overview
GEM Z Solenoid valves are spring assist open internal system. These bases are available in Brass without manual override come with a removable coil and can be supplied in all voltages. Coils have a IP 65 din plug as standard all wet metal parts are made of passivated Stainless steel and brass this design makes it possible to acheive high pressure with low inrush and holding currents with a wide voltage tollerance. |
 |
G75 Hydraulic Relays
Overview
GEVA 75 Hydraulic Relay 3/2 Way was specially designed to control medium and large valves. Although being compact, the relay enables large flow pass. In order to overcome hydrostatic pressure caused by geographies altitude differences, a mechanism with various springs is available. |
 |
G75 - S type
Overview
GEVA 75 control valves, 3/4" and 1", provide high hydraulic performances in fluid control. Both the efficient design and the advanced technology plastics they are made of,make the valves strong, with very low maintenance.also available in 11/2 and 2" with or without flow control bonet |
 |
G75 Hydraulic Valves
Overview
GEVA 75 control valves, 1-1/2" and 2", provide high hydraulic performances in fluid control. Both the efficient design and the sophisticated plastics they are made of, make the GEVA 75 valves strong, with very low maintenance. |
 |
 |
G75 Hydraulic options
Overview
GEVA 75 control valves, 1-1/2"and 2", provide high hydraulic performances in fluid control. Both the efficient design and the sophisticated plastics they are made of, make the GEVA 75 valves strong, with very low maintenance.can be used in other applications dependant on accessories fitted.
Applications
Electric remote control
Level control
Environmental control
Filtration systems |
 |
|
|
|
|
|
|
|
|
|
