Irrigation Valves & Controls
Baccara provide advice and guidance on the selection and installation of:
- Single station window controllor
- Multi zone Controller
- G75 Pilot valve
- G75 Latch Coils
- G75 Hydraulic Relays
- G75 - S type
- G75 Hydraulic Valves
- G75 Hydraulic Options
Single station window controllor
Overview Stand-alone battery driven irrigation controller timer with a G75 2W NC 9VDC latch coil connected. Powered by a single 9V battery. Can operate any valve equipped with 3/4" UNEF solenoid cavity (Richdel type).
TOP 
|
Multi zone Controller
Overview The Geva 75 multi-zone AC irrigation controller is a new generation of irrigation controllers, with a user friendly menu driven interactive software. It is a 24VAC, 4 to 8 zones irrigation controller with an integrated backup battery. Enables to operate G75 24VAC coils or equivalent.also can be supplied stand alone Battery operated and fitted with latch coils for longer service life
TOP
|
G75 Pilot valve
Overview GEVA 75 1/8" Solenoid valves are based on GEVA 75 operators mounted on a plastic base. These bases are available with or without flange, manual override as standard.the epoxy encapsulated construction ensures complete sealing of coil and leads all wet metal parts are made of passivated stainless steel for high corrosion protection this sfficient design makes it possible to acheive high pressure with low inrush and holting currents with a wide voltage tollerance
TOP
|
G75 Latch Coils
Overview The Two way, Three way normally closed, normally open operator is compatible with the 3/4-20 UNF operator seat. Epoxy encapsulated construction and exclusion of air, assures complete sealing for the coil and lead wires entry. Wet metal parts are made of passivated Stainless steel for maximum corrosion protection. The operator consists of one coil with exit of two lead wires. Electrical operation by reversing the current, by use of transistors or relays.
TOP
|
G75 Hydraulic Relays
Overview GEVA 75 Hydraulic Relay 3/2 Way was specially designed to control medium and large valves. Although being compact, the relay enables large flow pass. In order to overcome hydrostatic pressure caused by geographies altitude differences, a mechanism with various springs is available.
TOP
|
G75 - S type
Overview GEVA 75 control valves, 3/4" and 1", provide high hydraulic performances in fluid control. Both the efficient design and the advanced technology plastics they are made of,make the valves strong, with very low maintenance.also available in 11/2 and 2" with or without flow control bonet
TOP
|
G75 Hydraulic Valves
Overview GEVA 75 control valves, 1-1/2" and 2", provide high hydraulic performances in fluid control. Both the efficient design and the sophisticated plastics they are made of, make the GEVA 75 valves strong, with very low maintenance.
TOP
|
G75 Hydraulic options
Overview GEVA 75 control valves, 1-1/2"and 2", provide high hydraulic performances in fluid control. Both the efficient design and the sophisticated plastics they are made of, make the GEVA 75 valves strong, with very low maintenance.can be used in other applications dependant on accessories fitted Applications
|