Pressure Switches
Baccara can offer you reliable pressure switches that are either field adjustable or factory set which will suit all pressure control/measurement requirements.
|
|
PDPA Pressure Switch
The PDPA/PDPF(PS11) series is a field adjustable or factory set compact pressure switch with a set point range at 0.55 to 12 psi. The standard diaphragm is Nitrile Standard. (Optional Viton and EPDM diaphragms are available.) The 5 amp snap action micro-switch is rated for more than 106 cycles thus ensuring long life when operated at the recommended conditions. Repeatability is 1%. TOP
|
PSA/PSF Australian Made Adjustable
The PSA/PSF series is a field adjustable or factory set compact pressure switch with a set point range at 2 to 150 psi. The standard diaphragm is Nitrile Standard. (Optional Viton and EPDM diaphragms are available.) The 5 amp snap action micro-switch is rated for more than 106 cycles thus ensuring long life when operated at the recommended conditions. Repeatability is 1%. TOP
TOP
|
PDA Pressure Switch
The PDA/PDF series is a field adjustable or factory set compact pressure switch with a set point range at 2 to 200 psi. The standard Nitrile diaphragm is compatible with a wide range of fluids as well as being ideal for pneumatic systems. Optional Viton and EPR diaphragms are available. The 5 amp snap action micro-switch is rated for more than 106 cycles thus ensuring long life when operated at the recommended conditions. Repeatability is 1%. TOP
|
PMLA Pressure Switch
The PMLA/PMLF (PS31) series is a field adjustable or factory set compact pressure switch designed for OEM applications. The Kapton membrain makes it ideal for low pressure hydraulic applications or engine oil and water with temperatures up to 130C likely. TOP
|
PSHA Pressure Switch
The PSHA/PSHF series is a field adjustable or factory set compact pressure switch with a set point range at 15 to 3500 psi. The standard diaphragm is Nitrile Standard. (Optional Viton and EPDM diaphragms are available.) The 5 amp snap action micro-switch is rated for more than 106 cycles thus ensuring long life when operated at the recommended conditions. Repeatability is 1%. TOP
|
PSAH Pressure Switch
The PSAH series is a field adjustable model from 10 to 5000 psi dependant upon spring type and actuator diameter. The maximum overpressure is 600 Bar (9000 psi). The standard Nitrile elastomer diaphragm is compatible with a wide range of fluids as well as being ideal for pneumatic systems. Optional Viton and EPDM diaphragms are available. The 5 amp snap action micro-switch is rated for more than 106 cycles thus ensuring long life when operated at the recommended conditions. Repeatability is ±2%. TOP
|
PDCA Feild Adjustable Pressure Switch
The PDCA model is an inline, compact pressure switch that is field adjustable from 0.35 Bar (5 psi) to 420 Bar (6000 psi) rising pressure dependant upon the combination of spring rate to actuator area. The "cushion" supported diaphragm, used on all switches where system pressures exceed 35 Bar (500m psi) is a proven concept which prevents any extrusion of the elastomer diaphragm even at pressures of up to 545 Bar (8000 psi). Optional diaphragm materials include Nitrile (standard), Viton and EPR The standard electrical circuit used is a three wire, 5 amp, snap action microswitch. The temperature range is -40°F to +180°F (250°F Viton) Repeatability is ±1%. TOP
|
PMHA Pressure Switch
The PMHA/PMHF (PS61) series is a field adjustable or factory set compact pressure switch designed for OEM applications. The high proof pressure makes it ideal for hydraulic applications such as forklift trucks scisserlifts and off road equipment The standard diaphragm is Nitrile Standard. (Optional Viton and EPDM diaphragms are available.) TOP
|
G75-DP-1 Digital Differential Pressure Gauge Switch
TOP
TOP |
PJDA Differential Switch
The PJDA differential pressure switch represents a breakthrough in compact, low system pressure differential switches. The sensing diaphragm only operates when the difference between the High and Low rises or falls to the adjusted conditions. The set point can either be factory set or field adjustable through the low pressure port. The adjustable range is dependent upon the spring rate which is factory installed. Standard features of the differential switch include a 5 amp snap action microswitch and SPDT circuit (3 wire). The electrical connection is DIN 43650A either with a cable connection or 1/2in. conduit. Optional ports and diaphragm materials are available on request. TOP
|
SPP-974 Air filter Differential indicator
The SPP-974 differential pressure Indicator is ideal for the monitoring of Air filters. This simple differential indicator has set range in green and red . Green from 0 > 350 mbar (5psi) Red 350 > 500mbar (7psi) indicating dirty filter . a simple red green bar indicator is also available. . Optional ports and pressure ranges are available on request. TOP
TOP
|
PSP/5/12 Water Pump Control
The PM/5 - PM/12 Water Pump Control Pressure Switches offer accurate control at a reasonable price. The single port switch has a mechanical life which is rated at 1,000,000 cycles at 0 to 50 psi. TOP
|
PSC/12 Air Compressor Control
The PMA/12 Air Compressor Control Pressure Switch offers accurate control at a reasonable price. The switch has 4 ports and includes as standard, a Manual Shutoff Valve with a readily accessible On/Off button. The mechanical life is rated at 1,000,000 cycles at 0 to 100 psi. TOP
|